10 Ways To Remove Mold From Your Bathtub

clean your bathtub wellMold in the bathtub is an eyesore and can become a safety issue. Causing respiratory problems and spreading along your tub, it’s wise to remove mold as quickly as possible. Fortunately, removing the mold and mildew from your bathroom is actually quite simple. Here are ten effective ways to banish the mold from your bathroom.

1. Lower Humidity Levels
Mold grows when conditions are right. Moisture and warmth create prime growing spots, but you can eliminate the problem by ventilating the bathroom. Run the fan when you shower to remove humidity from the room, or open the door or window for circulation.

2. Baking Soda
Mix a paste of water and baking soda. Scrub the paste into the grout and caulk and allow it to sit. Spray the paste with water and scrub it with a stiff brush to remove the mold and leave your bathroom sparkling clean.

3. Tea Tree Oil
Pick up a bottle of tea tree oil to remove mold. It can be expensive, but you will only need a small amount. Combine two teaspoons of tea tree oil with two cups of water. Mix them in a spray bottle, shake it to mix and then spray it on the mold. Do not rinse it off, but allow it to work naturally.

4. Grapefruit Seed Extract
Odorless and highly effective, you can also mix 20 drops of grapefruit seed extract with two cups of water. Mix them in a spray bottle and spray directly on the mold. Allow it to sit and it will permanently remove the mold.

5. White Vinegar
Spray undiluted white vinegar on the mold and allow it to sit. It will kill the mold naturally, and the smell will start to vanish in a few hours. If necessary, run the fan to make the odor more bearable.

6. Chlorine Bleach
Known for its ability to kill mold, a 1:3 diluted ratio of chlorine bleach will kill any mold in the bathtub. Spray it on the tile or sponge it on using rubber gloves. Allow it to soak in for a few minutes, and then clean it away with a fresh water rinse.

7. Commercial Sprays
The shelves of your local grocery store are lined with products promising to kill mold and leave your bathroom sparkling. The most effective ones contain bleach, and they work very well. This can be the best choice if you want to spray it and minimize your scrubbing afterward. Be sure to use these cleaners in a well-ventilated area.

8. Leave the Curtain Open
An ounce of prevention is always worth a pound of cure. Avoid mold to begin with by leaving the shower curtain open for a few minutes after you exit the shower. Air can circulate through the shower stall then, and the walls will dry before mold can start to grow.

9. Hydrogen Peroxide
Useful for cleaning cuts, it also kills mold. It is essentially bleach, so it can be used on the tiles and grout in your bathroom to restore them to their natural color. However, it’s easier on your skin and won’t make it difficult to breathe.

10. Replacement
If all other cleaning methods fail, then you may be facing a more involved project. Mold can seep so deeply into grout and caulk that no amount of scrubbing will remove the black growth. Use mold-resistant caulk to avoid replacing it again too soon, and invest in a quality sealer to prevent the spores from penetrating your new grout.

Removing mold from the bathtub is not a difficult task if you clean it regularly. Mold that has been allowed to sit and soak into grout or caulk can be impossible to remove. Using household cleaners, you can clear away the mold from the bathtub and restore its beauty. Call 1st Class Cleaning today for expert cleaning advice.

This entry was posted in Bathroom Cleaning and tagged , . Bookmark the permalink. Post a comment or leave a trackback: Trackback URL.

Post a Comment

Your email is never published nor shared. Required fields are marked *

You may use these HTML tags and attributes <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*
*